Temperature Controller Recorder and Alarm device,GSM controller and sms alarm
GSM Module for SMS alarm and phone calling alarm
Two relay output
Two alarm input
Model: GSM-TP02B
Email data logger report at daily timer preset
SMS alarm or phone calling alarm when temperature over or lower the preset minimum temperature and the maximum temperature data
The WAFER temperature controller,alert and monitoring solution allows the user to pre-set a temperature and humidity range and receive an alert (via SMS, phone call, email) if the current data exceeds the pre-set range.
An email log is also supported, allowing emailing of temperatures and humidity data once an preset timer from readings taken at preset minute intervals (settings are user configurable) prior to the sending the temperature data-log to the configured email address.
The WAFER device is controlled via the use of SMS command messages, these are standard text messages sent from a mobile phone which are formatted in a specific way to configure the device (i. e. Change GPRS settings).
Our standard products is QUAD GSM BAND at 850/900/1800/1900 MHz, Before order, please confirm your working frequency. And select the right products for your project.
Functions include:
Four relay output controller
Remote temperature reporting of site equipment
Logging of temperature data in remote locations via email
Over/under temperature alarm notification via SMS and phone call or email.
Instantaneous temperature reading via status SMS
Features:
| Power input |
AC/DC12V |
| Frequency Band |
Global Quad Band GSM/GPRS Engine ( 850/900/1800/1900MHz ) |
| Dimensions |
153 mm X 66 mm X 28 mm |
| Temperature Range |
-40-120*C |
| Temperature Detection accuracy |
0.3'c |
Typical Applications:
Server Room Monitoring
Museums, Archives, Galleries
Laboratory and Quality Test Workshops
Factories
Hospital Room Monitoring
Air-Conditioned Rooms
Cold Storage Monitoring
Green House Monitoring
Building Management and Automation
Robust aluminium construction.
Unlimited range wire free temperature and humidity monitoring using GSM module.
Four channel Relay outputs to control most automation systems (volt free).
Easy operation with 2 numbers in monitor and remote control.
Works with mobile phones and land lines.
Mains powered with DC12vpower adapter.
Humidity Range at 0-100% RH
Humidity and Temperature data log saved with timer and send through the Email
){kind=link}
){kind=link}